Host apk upgrade instructions for each plan（各方案主机apk升级说明）

Driving the Future

Home ＞ Support ＞ Host apk upgrade instructions for each plan（各方案主机apk升级说明）

鼎微（Toparea/Topway）

1、主机联网选车型

Connect to wifi to select car model

掌讯（XY AUTO）

1、车载设置-工厂设置（8888）

Car Settings-Factory Settings（8888）

2、协议调试-点亮软件调试

CanBus Debugging-Light up Software debugging

3、协议设置-点击右下角“确认”进行更新(主机需联网)

CanBus Settings-Click "Confirm" in the lower right corner to update (the host needs to be connected to the Internet)

注意：若是未找到对应的车型选项，则可能需要点击《检查更新》以刷新车型列表

Note: If you do not find the corresponding model option, you may need to click "List Update" to refresh the car model list.

方易通（Fyttek）

方法一（Method 1）：

1、把升级的apk文件拷到u盘，点文件管理-把要升级的apk逐一安装

Put the upgrade file into the root directory of U disk and insert it into the host USB interface.

Click “FileManager”,Run all apk files,One by one installation can be completed

方法二（Method 2）：

1、主机连上WiFi，点车载市场-系统应用，把协议-车辆信息、协议-车型列表、协议-服务这几个都更新安装

First you need to connect to Wifi，then go to AppStore-System Applications, update and install the following

恒晨/稀图（HCN）

1、主机连上wifi，点设置-车载设置-系统信息-连续点击五次“CAN协议”进入apk更新界面，然后点击确定

First you need to connect to Wifi，then click Settings-Car Settings-Device Info-Click “Can info” five times in succession to enter the debugging apk download interface

诺威达（Nowada）

方法一（Method 1）：

1、先在u盘根目录下新建命名为updateApk的文件夹，把CanAllInOne.apk升级软件放在updateApk文件夹里

First, create a new folder named updateApk in the root directory of the USB drive, and put the CanAllInOne.apk upgrade software in the updateApk folder.

2、将u盘插到主机上，主机识别到升级文件会弹升级界面-点确认（如果不弹窗的话，去工具箱，点APK升级）

Insert the USB drive into the host. When the host recognizes the upgrade file, the upgrade interface will pop up - click Confirm (if no pop-up window appears, go to the tool box and click Upgrade Apk)

方法二（Method 2）：

1、主机连上wifi，去我的车-OTA升级-CAN 检查更新

First you need to connect to Wifi, Click- My Car- Upgrade-Check for update

迅族高通（SPD）

方法一（Method 1）：

1、主机联网，系统设置-版本-Android版本连点4下，密码输入2021 进入在线升级界面，点CAN更新

First you need to connect to Wifi,Click System settings--Version--Android version four times in a row，Enter the password 2021 to enter the online upgrade interface-- click CAN Update

方法二（Method 2）：

1、把升级文件spd.diff拷到u盘根目录下

Copy the upgrade file spd.diff to the root directory of the USB drive

注意：升级文件命要为spd.diff的，如有其他名称的，要自行修改

Note：The upgrade file name must be spd.diff. If it has other names, you need to modify it yourself.

2、主机识别到升级文件会自动升级，待提示“System upgrade has been complete，please remove the upgraded U disk or SD card”代表升级成功，然后根据提示拔掉u盘，主机重启（如果升级过程中主机自动重启了代表升级失败）

The host will automatically upgrade after recognizing the upgrade file. When the prompt "System upgrade completed, please unplug the upgrade USB disk or SD card" appears, it means the upgrade is successful. Then unplug the USB disk according to the prompt (if the host automatically restarts during the upgrade process, it means the upgrade failed)

景安驰（Jancar）

1、将文件解压后，得到AutoUpdate文件夹，将该文件夹复制到u盘的根目录下

Unzip the AutoUpdate compressed package to the root directory of the USB flash drive.

The ubzipped file is as shown below

2、把u盘插到主机上，等待5秒左右，弹出一个升级窗口，点击确定

When the host recognizes the file, an upgrade prompt box will pop up. Click OK

3、等待进步条走完后，系统将会重启，注意不要断电或者拔出u盘

It will automatically restart after the upgrade is completed.（Be careful not to turn off the power or remove the USB drive）

钱锋（QF）

方法一（Method 1）：

1、把apk文件拷到u盘

Put the apk upgrade file in the root directory of the U disk

2、文件管理-把升级的apk点击安装

Click “File Explorer”-UDISK1，Click the apk file-INSTALL

方法二（Method 2）：

1、主机连上wifi，原车信息-应用版本右边的更新按钮（有红色的点点表示有新软件），点更新，进度条跑完后点安装

First you need to connect to Wifi, click the update button on the right side of the original vehicle information-application version (a red dot indicates new software), click Update, and click Install after the progress bar is finished.

卓兴威（ChoiceWay）

1、把升级的apk拷到u盘里，如文件后缀不是.apk的要自行修改下

Copy the upgraded apk to the USB drive. If the file extension is not .apk, modify it yourself.

2、点ESuper文件-找到要升级的apk，然后点安装-更新

ESuper File-usb_storage-click canbus2.apk-INSTALL-UPDATE

英莫特（IMT）

方法一（Method 1）：

1、把升级的压缩包拷到u盘根目录下

Copy the upgraded compressed package to the root directory of the USB drive

2、把u盘插到主机上会提示开始升级，点击开始升级即可，提示升级完成后再拔出u盘

Insert the USB drive into the host and it will prompt to start the upgrade. Click Start Upgrade. When the upgrade is complete, unplug the USB drive.

方法二（Method 2）：

1、主机联网，点设置-关于设备-车型软件版本处连续点击3次

First you need to connect to Wifi, Settings-About device-Click the Vehicle version 3 times in a row

2、主机弹出升级界面，点击升级，下载升级软件后系统自动升级并重启机器

The host pops up the upgrade interface, click Upgrade, the system will automatically upgrade and restart the machine after downloading the upgrade software

注意：升级前必须确定网络良好，网络异常时不会弹升级提示框

Note: Before upgrading, you must ensure that the network is in good condition. If the network is abnormal, the upgrade prompt box will not pop up.